Whatsapp/Mobile: +8615350592434

  ​  All-terrain Vehicle Technology

​​info@fightertracks.com

  ​FIGHTER TRACKS​


SPROCKET. FT130
tank wheels

The inside structure of Fightertracks rubber tracks

Overlapping joint structure

ROBOT RUBBER TRACK
FT250C
rubber track chassis

Ring type mold, there is no joint.   

DRIVE SPROCKETS 

Simple flat mold, track  was connected by overlapping of 2 ends of flat track. 

robot tracks for diy robot chassis

Molding and processing

robot parts track wheels for robots

Use Nylon fiber as reinforcement material, have shrinkage in production.

No joint, the pitch distance is more stable. 

ROBOT RUBBER TRACK

FT-50A

ROBOT RUBBER TRACK

FT-30A

Cost 

ROBOT RUBBER TRACK 
FT130
rubber track chassis
ROBOT RUBBER TRACK
FT-76A

Material of reinforcement

​​

All rubber tracks products in Fightertracks are using continuous spiral structure rubber track, we never use rubber tracks with overlapping joint structure, following chart shows the differences of the 2 types of rubber track structure.  

 Item

ABOUT RUBBER TRACKS

robot tracks for sale for diy robot

2 types of rubber track structure

High, 5-8 times than Overlapping joint structure.

Continuous Spiral Structure

     The majority of Rubber Tracks utilize a traditional overlap type structure. When the track is under abnormal stress such as excessive tension, failure often occurs at the ends of the overlap area. We use Spiral steel cord structure, Spiral steel cord technology offers complete uniformity of tensile strength around the circumference of the track. In addition to even tension, an even distribution of traction minimizes the risk of track breakage.

Comparison of rubber tracks with different structure

Use steel wire of Kevlar as reinforcement material, high rigidity. 

 Joint of reinforcement

SPROCKET. FT255C
rubber track chassis
rubber tracks
rubber track chassis

 Low

Have joint, the joint is weak point. 

ROBOT RUBBER TRACK 
FT360
SPROCKET. FT360A